===== Adjusting Print Speed at a Layer Height =====
  
Some people find that setting the printer speed multiplier to 80%-100% during bridging, top/bottom layers, and then setting it to 150%+ during everything else, has lead to faster prints. YMMV. Below is how you set the speed multiplier (or any custom gcode) at a specific layer height.

[[https://marlinfw.org/meta/gcode/| GCode Reference site]]
  
  
1. {{:wiki:screenshot_2026-01-24_at_00.56.28.png?200|}}
2. {{:wiki:screenshot_2026-01-24_at_00.56.45.png?200|}}
3. {{:wiki:screenshot_2026-01-24_at_00.57.01.png?200|}}
4. {{:wiki:screenshot_2026-01-24_at_00.57.39.png?200|}}
5. {{:wiki:screenshot_2026-01-24_at_00.55.30.png?200|}}
6. {{:wiki:screenshot_2026-01-24_at_01.00.05.png?200|}}